This new brake kit will work with 88-98 rear ends, and does NOT require machining to the axle or rotors, because we use a true truck rotor. This caliper has an integrated parking brake, but will function without it hooked up.
Note:
Must measure axle housing bolt pattern and axle offset before ordering. These trucks used many rear ends through the year, and must confirm to make sure you receive the right kit.
(See bracket measurements here)
Note:
Must measure axle housing bolt pattern and axle offset before ordering. These trucks used many rear ends through the year, and must confirm to make sure you receive the right kit.
(See bracket measurements here)
Key Features:
1) No need to machine axles or rotor
2) Uses new calipers, not rebuilt
3) Laser cut zinc plated caliper brackets
5) Fits in most 18" wheels and larger
6) Will work with most aftermarket wheels, since caliper offset is negative.
Kit Includes:
- Mustang Caliper - New (Not Rebuilt)
- 13" 1-Pc. Rotor, Drilled / Slotted / Zinc Plated with Directional Vanes (1.1" Thick)
- 5x5 Bolt Pattern
- Caliper Mounting Bracket
- Stainless Steel Hoses
- All Necessary Hardware
- Brake Pads
